📍SOUTHWEST PHILADELPHIA, PA — KINGSESSING TO EASTWICK
Licensed & Insured Master Plumber serving Kingsessing, Cobbs Creek, Elmwood Park, Paschall, Eastwick & Penrose.
In Southwest Philly, the biggest threat to an electric water heater is water. Basements near Cobbs Creek and Darby Creek take on water in heavy storms, and moisture corrodes the 240-volt connections that power the unit. We repair electric water heaters the same day, replace units damaged by flooding, and install new tank and lowboy models raised above the flood line — with an electrical and moisture check, upfront written pricing, and the Philadelphia L&I permit on every installation.
The alarm warns you the moment water hits the basement floor. The flush clears the sediment that burns out lower elements. $149 Value — Yours FREE.
Est. 1999
Unbeatable Pricing
Nextdoor Verified
Save Time & Frustration
Same-Day Service Guarantee
Full-service plumbing + restoration across Southwest Philadelphia. One company handles it all.
Burst pipes, sewer backups, no-water emergencies. 24/7.
Camera inspection + hydro jetting. Clear the blockage permanently.
Tank and tankless. Electric and gas. Sized to your home’s actual demand.
Licensed and certified. Same-day pressure testing and utility coordination.
Basement flooded? We pump it out, dry it, and fix the plumbing that’s left.
Certified inspectors. If a flooded basement led to mold, we remediate.
Water heater repair and installation service in Southwest Philadelphia covers fixing a water heater that has stopped heating, leaks or trips its breaker, and replacing it with a new unit that fits the home and is protected from basement water. Southwest Philly sits along Cobbs Creek, Darby Creek and the lower Schuylkill, and many basements here flood in heavy storms. Electricity comes from PECO and gas from PGW. A permit from Philadelphia’s Department of Licenses and Inspections (L&I) is required to replace a water heater, and it must be pulled by a licensed plumber.
We handle all three sides of the job. Water heater repair: same-visit repair of heating elements, thermostats, high-limit switches, junction box wiring, T&P and drain valves. Installation & replacement: new standard or lowboy electric units, installed on a raised stand above the flood line where needed. Post-flood inspection & replacement: safe de-energizing, junction box and element testing, and insurance documentation when a unit can’t be saved.
Many plumbing companies operate as franchises. As a homeowner, you end up paying for their franchise fees, multi-level management and corporate marketing — on top of the repair.
Precision Plus is different. We’re a local, family-owned business with no call center dispatching a random technician. We check the basement conditions, not just the tank, so the same part doesn’t fail again — and we never re-energize a unit whose junction box sat in water until it’s inspected and tested.
What makes us truly unique: We’re the only plumbing company with a Licensed Master Plumber and a Water Damage Restoration department under one roof. When a storm floods your basement, we replace the water heater AND dry out the damage — one company, one call.
Every flood-prone install gets a raised stand above past water lines, sealed anti-corrosion junction box connections, a drain pan routed to a floor drain or sump, and a disconnect you can reach without stepping into water.
No hot water / tripped high-limit reset
Real repairs and flood-safe installations by our team — from corroded junction boxes to new units raised above the flood line.
In most neighborhoods, an electric water heater fails from age. In Southwest Philly, water gets to it first.
19153
→ BASEMENTS THAT FLOOD
Homes near Darby Creek and in low-lying parts of Eastwick can take on water in heavy rain, and a water heater on the floor is the first appliance it reaches. Many Eastwick homes date from the 1960s–70s, with the water heater in a tight utility closet. We check the space and the flood history, then install on a raised stand so the elements, thermostats and junction box sit above past water lines.
19143
→ MOISTURE ON THE 240-VOLT SIDE
Even without a full flood, damp basements corrode junction box terminals and element connections. That causes intermittent heating, breaker trips and, left alone, overheated wiring that’s a fire risk. We clean, replace and seal the connections with anti-corrosion compound on every service call.
19143
→ PRE-WAR ROWHOUSES & UNDERSIZED CIRCUITS
Kingsessing’s pre-war rowhouses may still have undersized circuits feeding the water heater. A new electric unit needs a dedicated 240V/30A circuit, so we check the circuit, breaker and panel capacity before quoting — and add a dedicated circuit if needed.
19142
→ SEDIMENT & LOWER ELEMENT BURNOUT
Lukewarm water that runs out fast almost always means a failed lower element. Sediment builds up faster at the bottom of the tank after storms, coats the lower element and makes it overheat. It’s the part we replace most often here — so we replace it and flush the tank in the same visit.
19143
→ BREAKERS THAT KEEP TRIPPING
A shorted element, corroded junction box wiring, a worn breaker or an undersized circuit can all trip the breaker. In basements that have flooded, corroded junction box terminals are the cause most often missed. Don’t keep resetting it — we test from the panel to the element to find the real cause.
19143
→ POST-FLOOD ELECTRICAL SAFETY
A unit that sat in floodwater may need replacement even if it still heats, because water damages the controls, insulation and wiring. We never re-energize a water heater whose junction box sat in water until it has been inspected, cleaned or replaced, and tested. When it can’t be saved, we document the damage for your insurance claim.
From your call to hot water. Six steps. No surprises.
(484) 436-4190. No-hot-water and flooded-unit calls are dispatched same day, including evenings, weekends and holidays.
We check the breaker and voltage, then open the junction box for corrosion or water damage. If the basement has flooded, we inspect before anything is re-energized.
Elements, thermostats, high-limit, anode rod and tank condition, with a plain explanation of what failed and why.
Exact price before any work. If replacement is the better call, the quote covers the right unit, a raised stand if needed, and the L&I permit.
Junction box connections cleaned and sealed, unit run under full load, 120°F confirmed at the tap, T&P valve checked.
Recommendations for raising the unit, drainage and leak alarms, plus photos and a written report if you're filing an insurance claim. Warranty on parts and labor.
Founder & Master Plumber • Since 1999
Derrick Jackson founded Precision Plus Plumbing in 1999 to save busy homeowners time and frustration. His team works across Philadelphia’s older homes, including Southwest Philly basements where water damage and electrical problems meet. Derrick is the author of Precision Service Experience, a homeowner’s guide to choosing reputable contractors.
![]()
Saxon DaveTrustindex verifies that the original source of the review is Google.
Great service, very professiona,l on time, cleaned up afterwards, very respectable. I would definitely be calling him for all my needs. Before I go to anybody else for anything, i will call Precision Plus first. Five out of five stars for me![]()
Mary WorthyTrustindex verifies that the original source of the review is Google.
Precision Plus Plumbing came out the next day and quickly got to work. They showed real care for our children’s well-being and handled everything with professionalism and compassion. Highly recommend!![]()
Keisha Jackson-SmithTrustindex verifies that the original source of the review is Google.
Derrick was very efficient and professional. He explained what needed to be done in detail and completed the job in a timely manner. I am very pleased with the result.![]()
Brian FeasterTrustindex verifies that the original source of the review is Google.
Derrick from Precision Plumbing, performed mold testing, was quick, professional and efficient!![]()
Beverly BoldenTrustindex verifies that the original source of the review is Google.
Derrick was quick assessing my issues problem solved in no time great job thanks so much![]()
Wayne TuckerTrustindex verifies that the original source of the review is Google.
QUALITY 5 STARS![]()
Dave WatsonTrustindex verifies that the original source of the review is Google.
Great experience! Quick turnaround on a Saturday. Fixed the issue and was a pleasure to work with.
No-hot-water and flooded-unit calls go first, every day of the year.
We check the basement conditions, not just the tank, so the same part doesn’t fail again.
The same team diagnoses, quotes, permits and installs.
Raised stands, sealed connections and accessible disconnects as standard where basements flood.
You approve the price before any work starts.
A.O. Smith, Rheem, Bradford White, State, Kenmore, American Standard, Whirlpool, GE, Bosch, Stiebel Eltron.
We give you a real arrival window — and we hit it. If we’re late, we pay you. That’s not marketing. That’s how we operate.
Written estimate before any work starts. If your flooded unit can be saved, we tell you. If it can’t, you get a straight answer and the photos for your insurance claim.
If the repair doesn’t meet your expectations, tell us before we leave. We make it right — or you don’t owe a dime for the work
Straight answers on repairs, flood damage and new installations in Southwest Philly homes.
Most repairs run $125–$450: a heating element or thermostat is typically $150–$250, and junction box cleaning or rewiring $200–$350. A new electric water heater installed typically costs $1,000–$2,000 or more, depending on the unit, electrical work and whether it needs a raised stand. You get a written estimate first.
Same day for no-hot-water and flooded-unit calls, including evenings, weekends and holidays.
Not until it’s inspected. Turn off its breaker, and don’t reset it if it tripped during the flood. Water in the junction box can corrode the connections and create a shock or fire risk. We inspect, clean or replace the connections, and test the unit before turning it back on.
It depends on how high the water got and how old the unit is. If the controls, junction box or insulation were soaked, replacement is usually safer. We test it, give you a straight answer, and document the damage for your insurance claim.
Yes. In basements that have flooded before, we install the unit on a raised stand so the elements, thermostats and wiring sit above past water lines. A lowboy model helps when ceiling height is tight.
Yes. Replacing a water heater in Philadelphia requires a plumbing permit from the Department of Licenses and Inspections (L&I), pulled by a licensed plumber. We include the permit in every installation quote.
It can be either. A shorted element, corroded junction box connections, undersized wiring or a worn breaker can all cause it. In damp Southwest Philly basements, corroded junction box terminals are a common cause that’s often missed. Don’t keep resetting it.
Sediment collects at the bottom of the tank and coats the lower element, which makes it overheat. We replace the element and flush the tank in the same visit, and can suggest a flushing schedule to make the next one last longer.
Same-day water heater repair and flood-safe installation across Southwest Philadelphia — founded by a Master Plumber, backed by 25+ years of proven results.